Chat with us, powered by LiveChat
X

Rust Inhibiting Oil

Rust Inhibiting Oil

$30.80$87.90 excl. GST

Rust Inhibiting Oil is a searching oil, and when applied over rusty steel will disperse moisture and protect steel from further corrosion. Rust Inhibiting Oil will withstand extended periods of weathering uncoated, but an alkyd primer and finish coat will give long lasting results. Rust Inhibiting Oil is ideal wherever ferrous metals are corroding under normal atmospheric conditions.

NB: Do not use on clean non-corroded steel as this will affect adhesion of subsequent coats.

Great for trailers, flashing, roofs, balustrades!

Physical Properties –
Colour/Texture: Transparent tan colour with a satin sheen.
Volume Solids: 30%.
Product Density: 0.86kg/litre.
Drying Time: Allow 24 hours before applying primers.
Recoat: 24-48 hours dependent on drying conditions.
Flashpoint :32°C.

Surface Preparation – Ensure surfaces are clean and dry. Remove loose rust or flaking contaminants such as mill scale etc.

Application Data –
Apply Rust Inhibiting Oil liberally by brush or low pressure spray. Its searching qualities will assist it to creep under rust and lapped steel. Allow 24 hours to dry before applying primers. Rust Inhibiting Oil does not normally affect existing paint, but areas should be applied and checked for suitability before proceeding with full application.

Recommended D.F.T.: 20 microns.
Recommended W.F.T.: 65 microns.
Theoretical Spreading Rate: 15m2/litre.
Thinners: R4.

Available in a 1 Litre or 4 Litre tin!

Clear
SKU: 401-1 Categories: , Tags: , ,

Additional information

Amount

1 Litre, 4 Litres